公司新聞
廠拌冷再生反射裂縫及施工現場狀況！
來源：http://www.cansolv.cn/ 日期：2021-05-04
廠拌冷再生結構主要用于瀝青路面的基層，屬于“半柔性基層”范疇，它可預防反射裂縫，從而延長瀝青面層的使用壽命；銑刨后舊料回收利用，可以避免污染環境，符合提倡的建設節約型、可持續發展的時代主流。冷再生基層施工工藝經過多個實際工程應用，取得了良好的經濟效益和社會效益，冷再生能更加有效的控制材料的質量與路用性能。
The plant mix cold recycling structure is mainly used in the base of asphalt pavement, which belongs to the category of "semi flexible base". It can prevent reflection cracks and prolong the service life of asphalt pavement; After milling, the old material can be recycled to avoid environmental pollution, which is in line with the mainstream of the era of building a conservation oriented and sustainable development. After several practical engineering applications, the construction technology of cold recycling base course has achieved good economic and social benefits. Cold recycling can more effectively control the quality of materials and road performance.
冷再生技術有較好的儲存功能，通過冷再生處理的混合料可以在一定時間內儲存備用，克服了就地冷再生中的生產和攤鋪相互依賴的缺陷。泡沫瀝青再生混合料中以舊路材料為主，有效的解決了銑刨料的再生利用，同時可以避免污染環境。冷再生處理有效地解決了發泡效果以及銑刨料的破碎程度，保證了冷再生混合料的路用性能。
Cold recycling technology has a good storage function. The mixture treated by cold recycling can be stored for standby in a certain period of time, which overcomes the defect of interdependence between production and paving in the on-site cold recycling. Foamed asphalt recycling mixture is mainly made of old road materials, which effectively solves the regeneration and utilization of milling materials, and avoids polluting the environment. Cold recycling treatment can effectively solve the foaming effect and the crushing degree of milling material, and ensure the road performance of cold recycling mixture.
路面標高可以不抬高或抬高較少，減少了擋墻、邊溝、綠化帶等附屬設施的加高費用；在面層結構設計中可以減薄瀝青面層厚度，從而有效地節約投資。冷再生技術是指將舊瀝青混凝土面層挖除或銑刨，再運送至料場堆放存貯。我們根據材料的情況破碎或過篩后，通過固定的施工設備，根據需要添加新料進行攪拌并噴入泡沫瀝青，生產泡沫瀝青再生混合料，然后運送至道路施工現場。
The elevation of the road surface can not be raised or raised less, which reduces the cost of heightening the retaining wall, side ditch, green belt and other ancillary facilities; In the design of surface structure, the thickness of asphalt surface can be reduced, so as to save investment effectively. Cold recycling technology refers to the excavation or milling of old asphalt concrete surface, and then transported to the stockyard for storage. According to the condition of the material, we break or sift through the fixed construction equipment, add new materials according to needs, stir and spray into foam asphalt, produce foamed asphalt regenerated mixture, and then transport it to the road construction site.
廠拌冷再生設備攤鋪壓實成型，成為一個路面結構層次的施工工藝。由于瀝青泡沫的衰減速度很快，在生產泡沫瀝青再生混合料時，需要在很短的時間內與冷集料拌和，因此，泡沫瀝青再生混合料的拌和設各應集材料傳送、瀝青發泡、混合料拌和等施工操作為一體。當前泡沫瀝青混合料常作為冷再生基層應用，屬于瀝青處置柔性基層的范疇。冷再生設備基層強度尚可，面層出現大面積病害的路段。
Plant mixing cold recycling equipment paves, compacts and forms, which becomes a construction technology of pavement structure level. Because the decay rate of asphalt foam is very fast, in the production of foamed asphalt recycling mixture, it is necessary to mix with cold aggregate in a very short time. Therefore, the mixing operation of foamed asphalt regeneration mixture should be one of the construction operations such as material transfer, asphalt foaming and mixture mixing. At present, foamed asphalt mixture is often used as cold recycling base, and belongs to the category of asphalt treated flexible base. The strength of cold recycling equipment base is acceptable, and the road section with large area disease on the surface layer.
公司地址：濟南市槐蔭區經一路273號群盛華城2號樓1-404
公司名稱：山東途暢路橋工程有限公司 
備案號：