行業資訊
天氣清冷之前冷再生機該如何進行保養?
來源:http://www.cansolv.cn/ 日期:2023-06-07
一、清洗外表
1、 Cleaning the exterior
冷再生機在施工過程中會有大量的灰塵落到再生機的表面,包括施工中沾污的油跡等污染物,影響外觀事小,更為嚴重的是成為腐蝕的誘發因素。
During the construction process of the cold regeneration machine, a large amount of dust will fall onto the surface of the regeneration machine, including pollutants such as oil stains during construction, which have a small impact on the appearance and, more seriously, become an inducing factor for corrosion.
清洗工程機械的柴油機、底盤、工作裝置的外表,除垢、除油保持再生機的外觀整潔。
Clean the exterior of the diesel engine, chassis, and working equipment of construction machinery, remove dirt and oil to maintain a clean and tidy appearance of the regeneration engine.
清洗時嚴禁用高壓、高溫的水槍來沖洗防水要求較高的部位(特別是電器部分),以免造成電器部分的損壞。
It is strictly prohibited to use high-pressure and high-temperature water guns to wash parts with high waterproof requirements (especially electrical parts) during cleaning, in order to avoid damage to the electrical parts.
清洗外表,是冷再生機租賃機械冬季保養要點之一。
Cleaning the exterior is one of the key points for winter maintenance of cold regeneration machine rentalmachinery.
二、保養轉子及其罩殼和滑靴
2、 Maintain the rotor and its casing and shoes
1.檢查轉子是否有水泥結垢等,及時清理灰塵,對需要割除、焊接的刀具及時更換;2.清理轉子罩殼上的灰塵,并在施工結束收車時將轉子罩殼墊起地面5-10公分,防止雨雪的浸蝕;3.檢查滑靴,對已經磨損的滑靴部分進行補焊,螺紋處應涂抹黃油防銹。
1. Check if there is cement scaling on the rotor, clean the dust in a timely manner, and replace the cutting tools that need to be cut or welded in a timely manner; 2. Clean the dust on the rotor casing and pad the rotor casing 5-10 cm above the ground at the end of construction to prevent erosion by rain and snow; 3. Check the sliding shoes, repair welding the worn parts of the sliding shoes, and apply butter to the threads for rust prevention.
天氣清冷之前冷再生機該如何進行保養呢?以上所講內容便是問題的相關事項了,還有怎樣的疑惑或者需求,就來我們網站http://www.cansolv.cn咨詢吧!
How should the cold regeneration machine be maintained before the weather becomes clear and cold? The above content is related to the issue. If you have any doubts or needs, please come to our website http://www.cansolv.cn Consult!