除塵系統對于粉料撒布車而言，是一套起著非常重要作用的結構，在施工過程中起到過濾粉塵，達到環保排放要求的重要作用。

The dust removal system is a very important structure for powder spreaders, playing a crucial role in filtering dust and meeting environmental emission requirements during the construction process.

白灰撒布車租賃隨著施工的使用，除塵系統內部的除塵布袋要定期維護保養與更換也就顯得尤為重要。如車輛不是每天都工作，可選擇3個月拆卸吹掃一次；如車輛日工作量在50噸，連續作業，可選擇2個月拆卸吹掃一次；如車輛日工作量在100噸以上，且連續作業不停歇，則應縮短更換、吹掃維護保養周期。如不對除塵布袋定期更換或吹掃，有可能會導致車輛除塵效果不好、車頂輕微起鼓、除塵布袋內撐損壞，下面我們來講一下應該如何維護與更換。

With the use of construction, it is particularly important to regularly maintain and replace the dust removal bags inside the dust removal system for the rental of white ash spreaders. If the vehicle does not work every day, you can choose to disassemble and blow it once every three months; If the daily workload of the vehicle is 50 tons and it operates continuously, it can be dismantled and blown once every 2 months; If the daily workload of the vehicle is over 100 tons and continuous operation does not stop, the replacement, blowing, maintenance and upkeep cycle should be shortened. If the dust removal bag is not replaced or blown regularly, it may lead to poor dust removal effect of the vehicle, slight bulging of the roof, and damage to the internal support of the dust removal bag. Below, we will explain how to maintain and replace it.

粉料撒布車租賃除塵系統位于車輛的后尾部，維護保養更換的時候需要把后方的上倉蓋打開，打開上倉蓋后便能看到除塵箱，除塵箱同樣有一個密封蓋板，維修的時候同樣要把這個蓋板打開；除塵箱邊部為除塵用氣瓶，同時連接著電磁閥，拆卸時把中間位置接頭擰開，把線路從接頭處斷開即可。

The dust removal system for the rental of powder spreader trucks is located at the rear of the vehicle. During maintenance and replacement, the upper compartment cover at the rear needs to be opened. After opening the upper compartment cover, the dust removal box can be seen. The dust removal box also has a sealed cover plate, which should be opened during maintenance; The edge of the dust removal box is a gas cylinder for dust removal, which is also connected to an electromagnetic valve. When disassembling, unscrew the middle position joint and disconnect the circuit from the joint.