1. Low cost

道路就地冷再生機因為所有利用了舊的路面起模原材料，進而降低了道路檢修或更新改造時舊起模原材料的基坑開挖、運送、廢置和新型材料的購買，進而造成成本費大幅降低。選用道路就地冷再生比傳統式方法對比，伴隨著再生層薄厚的不一樣，能夠 控制成本，冷再生路面薄厚越厚，控制成本越多。如05年吉林省線磐石段改建工程的施工，經經濟發展技術性互斥計劃方案較為后，選用混凝土冷再生施工加工工藝開展道路農村基層的再生利用，節省項目投資近43%。再生薄厚為27cm，再生層工程預算為42元/m2，而選用傳統手工藝，需雙層水穩加固，加上原路面原材料需消除外調，工程造價為73元/m2，此后例中由此可見冷再生技術性可使工程成本大幅度降低。在路面農村基層因其原料的再利用可節約很多項目投資，在低級別路面中，因用冷再生加工工藝可提升路面農村基層級別而減少整體面層的資金投入，這類客觀性具體優勢的存有是促使就地冷再生技術性遭受認可而且獲得迅速發展趨勢的原始動力。

The road local cold recycling machine uses all the old road formwork raw materials, which reduces the foundation pit excavation, transportation, waste and purchase of new materials of the old formwork raw materials during road maintenance or renewal, resulting in a significant reduction in the cost. Compared with the traditional method, the local cold regeneration of the road can control the cost with the difference of the thickness of the regeneration layer. The thicker the thickness of the cold regeneration pavement is, the more the control cost is. For example, in the construction of the reconstruction project of Panshi section of Jilin Provincial Railway in 2005, after the technical mutual exclusion plan of economic development is relatively, the cold recycling construction and processing technology of concrete is selected to carry out the recycling of rural road base, saving nearly 43% of the project investment. The thickness of the recycled layer is 27cm, and the engineering budget of the recycled layer is 42 yuan / m2. However, the traditional handicraft is selected, which needs double-layer water stability reinforcement. In addition, the external transfer of raw materials of the original pavement needs to be eliminated, and the engineering cost is 73 yuan / M2. In the following example, it can be seen that the cold recycling technology can greatly reduce the engineering cost. In the rural base course of pavement, the reuse of its raw materials can save a lot of project investment. In the low-level pavement, the use of cold regeneration processing technology can improve the level of rural base course of pavement and reduce the capital investment of the overall surface course. The existence of such objectivity and specific advantages is the original power to promote the recognition of in-situ cold regeneration technology and obtain the rapid development trend.

2.效率高

2. High efficiency

道路就地冷再生機械設備施工一次性能夠 進行瀝青道路、粉碎、加上、攪拌及鋪筑，進而簡單化了施工程序流程，減少施工施工期。應用就地冷再生機械設備，每日施工可進行平米的勞動量。

The construction of road local cold recycling machinery and equipment can carry out asphalt road, crushing, addition, mixing and paving at one time, which simplifies the construction procedure and reduces the construction period. The local cold regeneration mechanical equipment shall be applied, and the daily construction can carry out the labor volume of square meters.

3.受氣溫標準危害小

3. Little harm from temperature standard

舊地冷再生可以在氣溫自然環境不確定性的標準下施工，除開在降水量很大時，一般的變幻無常的氣溫，毛毛雨氣溫，冷再生機均可施工，即便在暴雨之后，也可立刻施工。

The cold regeneration of old land can be constructed under the standard of uncertain temperature and natural environment. Except for the general changeable temperature and drizzle temperature when the precipitation is large, the cold regeneration machine can be constructed immediately even after the rainstorm.

4.對城市公共交通危害明顯降低

4. The harm to urban public transport is significantly reduced

冷再生租用施工的特性是冷再生工藝流程簡潔明了，施工設備少，對交通出行影響體現不比較敏感全部冷再生機械設備組成能夠 處在同一條行車道內，不危害另一條行車道機動車行駛，可開展敞開式施工，非常適用車流量很大或路寬窄小狀況下的道路的施工。當道路半幅施工時，另半幅仍舊啟用，進而大大的改進施工情況下的交通條件。因而，做為一種效率高、環保節能、環境保護道路檢修方式和新技術新工藝，路面冷再生機早已變成國際性上道路更新改造的關鍵方式之一。

The characteristics of cold regeneration rental construction are that the cold regeneration process is simple and clear, there are few construction equipment, and it is not sensitive to the impact on traffic travel. All cold regeneration machinery and equipment can be located in the same traffic lane without endangering the driving of motor vehicles in another traffic lane. Open construction can be carried out, which is very suitable for road construction under the condition of large traffic flow or narrow road width. When half of the road is constructed, the other half is still used, which greatly improves the traffic conditions under construction. Therefore, as a road maintenance method and new technology with high efficiency, environmental protection and energy conservation, environmental protection, pavement cold recycling machine has long become one of the key ways of road renewal and reconstruction in the world.

以上就是為大家介紹的有關冷再生機出租的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以專業的態度,為您提供服務http://www.cansolv.cn

The above is a detailed introduction to the rental of cold regenerator. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.cansolv.cn